View previous topic :: View next topic |
Author |
Message |
meko I've settled in...
Joined: 29 Apr 2007 Posts: 35
|
Posted: Fri May 18, 2007 10:14 pm Post subject: Heat mats.. |
|
|
I'm building a new 2*2.5 viv for my leopard gecko and have a few heat mats. I was going to use the one from the viv (s)he's in now, a 2x1x1 and a bit fish tank and the heat mat is about 1x1 so obviously too small for the new viv.
Out of the few mats i've got kicking about i've 2 * 17x6 where obviously 1 isn't big enough but 2 would do the trick. Instead of paying out for a dual mat stat would it be save to wire them both to the same plug? |
|
Back to top |
|
 |
christophermchale CaptiveBred Addict!

Joined: 30 Apr 2007 Posts: 588 Location: cheapest viagra on the internet!
|
Posted: Sat May 19, 2007 12:29 am Post subject: |
|
|
after trying to decipher through the hieroglyphic like writing the best solution i can give you is getting a plug splitting extension that you can plug 3 into and you can plug that into the stat. _________________ cardboard city. |
|
Back to top |
|
 |
meko I've settled in...
Joined: 29 Apr 2007 Posts: 35
|
Posted: Sat May 19, 2007 10:52 am Post subject: |
|
|
please accept my most since apologies for spelling 1 word wrong. |
|
Back to top |
|
 |
|